PC housing buying and knowledge tips as well as market overview with 80 models

Housing, or more normally living rooms, refers to the building and construction as well as appointed use of residences or buildings collectively, for the objective of safeguarding individuals– the preparation or arrangement supplied by an authority, with relevant significances. Ensuring that participants of culture have a home in which to live, whether this is a residence, or some other type of dwelling, lodging, or shelter, is a social concern. Several governments have one or more housing authorities, occasionally additionally called a housing ministry, or housing department.

PC housing – buying advice

In our purchase advice on PC enclosures, your tips can be found that enlighten you to all important around the hardware home. Thus, we facilitate you the successful search for a suitable housing. Topics are about the size of a housing and the ventilation, but also a checklist with some little things you may not have directly on the screen. Finally, we also have a market overview with 80 enclosures, which are also suitable for long gamer graphics cards and – except for some tiny enclosures – a proper CPU cooling.

Table of contents

  1. Page 1PC Housing: Caseformat
  2. 1.1PC enclosure – buy advice
  3. 1.1.1 Formats: Space PC or Mini Calculator?
  4. Page 2PC Housing: Cooling, Value for money, graphics card length
  5. 2.1Cooling and price performance
  6. Page 3PC Housing: Water Cooling, Checklist
  7. 3.1 water cooling: more planning necessary
  8. 3.1.1Checklist before the purchase
  9. Page 4PC Housing: Market Overview with 80 Housing Models
  10. 4.1marks overview: 60 ATX enclosures
  11. 4.1.1marks overview: 20 μATX and mini-ITX enclosures
  12. Page 5Pictures Gallery for PC housing: buying tips and market overview with 80 models

  13. open

Formats: Space PC or Mini Calculator?

For PC enclosures, there are several standards that allow certain conclusions to the overall size. More specifically, these standards come about through the so-called form factors of motherboards. These are maximum dimensions that a motherboard may have to count to a specific standard.

The most important and relevant for normal users are form factors (from small to large) Mini-ITX, μatx (also MATX or Micro-ATX), ATX and E-ATX. So that an E-ATX motherboard fits into a housing, it must therefore have at least the necessary dimensions plus even a few centimeters more for drives, power supply and cable. In general, the motherboards always fit into a housing, which have the same form factor as the housing, but also smaller motherboards can be installed. Conversely, it does not work – an ATX motherboard does not fit into a housing that is specified only with Mini-ITX or μATX as a design. The outer dimensions resulting from the end can also overlap: there are ATX housings, which are smaller smaller than many a μATX housing.

Bitfenix Enso RGB Source: Bitfenix This can happen, for example, as follows: A μATX housing offers a lot of space for drives and cooling, and more space is also offered, for example, to radiators for water cooling in the ground or at the Mount the ceiling of the housing. Another case may have room for ATX motherboards, but is very compactly designed for a very compact and therefore less deeply and lower than the μATX housing. Of course you have to decide in general before buying which case size gives the most sense for you. We recommend an ATX housing. There are several models that are quite compact and barely larger than many μATX housings. The advantage of ATX is that you have more choice with the motherboards. Anyone who wants to grab μatx so that the housing is as small as possible, must in turn be careful not to come into problems later, as far as the space and ventilation are concerned. MINI-ITX should only buy yourself if you know how to make Gamer hardware sufficiently cooled in such a small case. Some one will perhaps look conversely a particularly large case and choose E-ATX. From our point of view, however, this is not necessary, as well as compact ATX housing thanks to modern graphics card and CPU coolers now enable excellent cooling. The times in which strong gamer hardware needed a lot of space so that there is enough air and fans, have been over for some time. E-ATX is only useful for extreme situations or for PCs, in which, for example, one wants to install an Armada on hard drives, or even for users who reliant on a professional motherboard from the server area, often the E-ATX format to have.

From Antonio Funes
21.09.2021 at 11:57



1 2 … 5 PC Housing: Case Formatepc Case: Cooling, Value For Power, Graphics Card Length PC Case: Water Cooling, Checklist Case: Market Overview with 80 Housing Model Pictures Gallery for PC Case: Buy Tips and Market Overview with 80 Models

Leave a Reply

Your email address will not be published. Required fields are marked *